Three valve with electric hydraulic, pneumatic, manual. Three valve can also be called three way splitter, three through feeder, three way valve, electro-hydraulic three valve, pneumatic three way splitter and other call.

Three way splitter can be used for material reversing / shunt flow. And allowed in material flowthrough commutation; DSF-C (D, E) - type electric hydraulic three distributor can be used formaterial reversing shunt process, and a gate control material cut off or kinetic energy; at the same time at the same time, the role of circulation.

The working principle of:

Three valve [1] adopts the electric hydraulic push rod as power source. Because of the advantages of automatic overload protection performance, when the operation is blocked, oil pressure increased to set limits, overflow valve quickly and accurately to overflow, implements overload protection. The operation of the motor will not burn in the rated value. When the push rod runningto the setting travel terminal, the electric hydraulic push rod oil circuit integrated block in the design of a self-locking mechanism, the motor stops, the piston rod is self locked in this position, in the state of pressure keeping. The rotating shaft mechanism through the electric hydraulic push roddrives the three distributor, to control the turning plate overturns, reach the material reversingeffect.

The characteristics of;

This product can be directly to the upper flange connected to the head of the tape machine funnelor other equipment under the material at the interface, which is generally used in bulk density is less than or equal to 2.8t/m, and the wear resistance is large, under the condition of poor working environment. Considering the structure of large size, large weight (wear-resisting lining board thick),the upper flange can not bear the weight of its own, use should be according to the actual situation of additional support.